FAQs

Click on the ‘person’ icon at the top of the page and follow the instructions to create your account. Alternatively, click here. Testing

• Click on "Forgot Password" 
• on the login page, 
• enter your email address, and follow the instructions in the email we send you. Lorem ipsum dolor sit

No, you can check out as a guest. However, creating an account allows you to track orders, save addresses, and be the first to know about any exclusive offers.

We accept major credit/debit cards, PayPal, and other secure payment methods displayed at checkout.

We currently ship worldwide. Shipping costs may vary based on location.

Shipping costs vary based on location and shipping method. Availability of next day delivery method varies depending on location. Standard Delivery (3-5 working days) - £3.95 Next Day Delivery (1-2 working days) - £9.99 We offer free delivery on all orders over £100 Discount applied automatically at checkout. For most items, a signature will be required on delivery, with the exception of fabric and wallpaper samples.

Once your order is shipped, you will receive a tracking number via email. You can use this number on our ‘Track Order’ page.

We offer a 30-day return policy. If you're not satisfied with your purchase, you can return it within this period for a refund or exchange. You can see specific returns conditions for each product on individual product pages. The following is a general guide per product category: Wallpaper: Sealed complete rolls of wallpaper may be returned. We cannot accept returns of wallpaper that has been printed to order. Fabric: Lengths of fabric are cut to order, and so are not returnable for lengths under 5 metres. For lengths over 5m we are able to accept returns of fabric, but this will be subject to a restocking fee of 25%. Made to measure items (curtains, blinds, cushions and headboards): These products are made to order, and therefore we are unable to accept returns. We cannot accept returns due to incorrect measurements supplied to us.

Please email us with your order number and details of the items you would like to return. Please wait for confirmation from us before returning your items. Goods are your responsibility until they reach our warehouse, so please make sure they are well packed. We recommend using a delivery service which requires a signature to ensure that you have proof of return. The cost of returning an item is at your expense. Once we have received your returned items we will email you to confirm receipt, and confirm any refund due.

Once we have processed a refund we will confirm this to you by email. The exact timing of when you receive the refund depends on your card issuer, our payment providers will pass funds back to your card issuer within 1 working day, but it will then typically take a few more days before funds are allocated by your card issuer to your account. Typically, refunds take 3-5 days.

Refunds typically take 3-5 working days to process after we receive the returned item.

We endeavour to make sure that every order arrives in perfect condition. However, in the event that your order is damaged, please contact us with your order details and a photo of the item, and we’ll resolve the issue as soon as possible.

Product availability is shown on the product page. If an item is out of stock, you can sign up for restock notifications.

Yes, many popular items are restocked. You can check back later or subscribe for notifications.

Each product page has a sizing chart or details under the "Details" section.

You can reach us via email at [email@example.com], or via telephone at +44 (0)203 4575 862. Our dedicated customer care team are available Monday - Friday (9am-5pm) and will aim to respond within 2 working days.

Yes, we use industry-standard encryption and security measures to protect your payment details.

Your privacy is important to us. We do not share your information with third parties without your consent. Please refer to our Privacy Policy for more details.

No, we do not store credit card details. All payments are processed securely through our payment partners.

The length of a roll of our wallpaper 10.05 metres (11 yards) with a standard width of 52cm, unless otherwise stated.

Yes, we recommend using a good quality lining paper to cross line the walls; this gives an excellent surface on which to hang wallpaper. Our Lining Paper is a lightweight paper, perfect for old and newly plastered walls.

‘Half Drop’ repeat is where every other horizontal repeat (from side to side) is dropped down one half of its length, i.e. the design repeats itself on the diagonal rather than the horizontal axis. ‘Straight Match’ is where the pattern repeats across the roll and is positioned at the same place at each selvedge. ‘Random Match’ or ‘Free match’ is where there are no pattern match points evident. 'Reverse Hang' alternate lengths, is where you hang every second (alternate) length upside down

Hanging instructions are sent with every roll of wallpaper. We recommend that your decorator reads these instructions fully before starting to hang the wallpaper.

All our wallpapers are sourced from environmentally responsible suppliers and manufactured in our British factory, Anstey Wallpaper Company, part of Sanderson Design Group.

Yes, Sanderson Design Group and its brands, including Harlequin, are FSC™ certified. The Forest Stewardship Council ™ (FSC) promotes responsible forest management worldwide, helping take care of forests and the people and wildlife that call them home for future generations. The majority of Sanderson Design Group’s wallpaper produced is now proudly FSC certified. If you would like to check a specific wallpaper, please contact Customer Service. Licence Code FSC-C210726. Look for our FSC™-certified products on the individual product pages

There are two different widths of wide wallcovering: Rolls which cover an area of 6.89sqm (74.16sqft) per roll Rolls which cover an area of 13.78sqm (148.32sqft) per roll The exact width of each wallcovering is specified in the Product Details table on each product page.

Our standard wallpaper rolls cover an area of 5.23sqm (56.3sqft). Please use the wallpaper calculator to check how many rolls you may need.

Step 1) Firstly, you’ll need to work out the number of drops required. You can do this by dividing the width of the walls by the width of the wallpaper roll and rounding up to the next whole decimal. For example: If the width of the wall was 300cm and the width of the wallpaper roll was 139cm then 300÷139= 2.15, which, rounded up, makes 3 drops of wallpaper. Step 2) Then, you’ll need to work out the lengths of the drop required. To do this, add the height of the wall to the height of the pattern repeat of the wallpaper before rounding up to the next whole decimal metre. For example: if the height of the wall was 300cm and the height of the wallpaper’s repeat was 96.1cm then 300+96.1= 396.1cm which, rounded up, makes 4m. NOTE: if the wallpaper has no repeat, then simply use the height of the wall, which in the example above is 300cm or 3m. Step 3) Multiply the number of drops (step 1) by the number of repeats (step 2):- Following the above example, this is 3x4 = 12 Add 5% onto this figure to allow for trimming and then round up to the next full metre. The final figure will be the amount of wallpaper you require. 12+0.6= 12.6 which, rounded up, makes 13m to be ordered. Where the product is also a ‘sold by the pattern repeat’ wallpaper, divide the total amount of metres to be ordered (as per the calculation above) by multiples of the pattern repeat. For example, 13m divided by a sold by the pattern repeat’s repeat of 1.33m will work out to at 9.77 multiples and so this figure must be rounded up to the next full repeat, meaning that 10 repeats of 1.33m are needed. This calculator provides an approximate qty recommendation only. Sanderson Design Group advise that you always consult your decorator before ordering wallpaper as we cannot be held responsible for any incorrect quantities of wallpaper ordered.

Our substrates are responsibly sourced, however once printed none of our wallcoverings are currently recyclable.

All untrimmed panels are supplied on one consistent roll length of 13.35m, which consists of 4 X 300cm panels. The extra 1.35mts is space for the roll wrap, hanging instructions and white space allowance for trimming.

Lime plaster/render are commonly located in older properties. Where there is a risk of moisture being present, we would advise on sealing the wall, otherwise this moisture would most likely attack the wallpaper over time. There should be no problem hanging wallpaper over the sealed walls, especially if the walls are then cross lined to give the wallpaper a good key to hang onto. Although our non-woven wallpapers are considered more 'breathable', as soon as any paste is applied to a paper it can act as a barrier. We would therefore advise the preparation steps are followed as above and the room is kept well ventilated. We would also advise the avoidance of any vinyl wallcoverings as these have a Poly Vinyl Chloride layer to them which can also act as a barrier and discourage breathability in an older property.

We would recommend that one of our vinyl wallpapers are used in a bathroom or kitchen as this achieves a 'scrubbable' finish and protects the paper from water splashes. However, if you wish to use a standard or non-woven paper, this can be used with sufficient surface preparation and the application of a surface sealant/varnish. A product we have tried and tested is Polyvine Acrylic Sealant/Varnish. This is a clear varnish which is applied to the top of the paper to protect it and make it more durable. We would always recommend that a small area is tested first to ensure there is no drastic shade change to the wallpaper. We would never recommend hanging the paper in an area which would come directly into contact with water splashes, i.e., behind a sink or shower. We would also advise on keeping the room as well ventilated as possible to avoid damp and mildew and to never hang wallpaper over a damp wall.

Surface prints are printed using a “wet on wet” ink printing process whereby one ink goes down shortly after the previous coloured ink. This means that one colour has little time to dry before the next ink is printed beside it. However, this isn’t a fault, and is part of the beautiful irregularities of traditional surface printing.

To reduce white edges showing when hanging dark coloured paper, it is recommended that a water-soluble crayon of the appropriate shade be used to colour the edge of the roll whilst in dry roll form prior to pasting/hanging. We can recommend the use of the Caran D'ache crayon, selecting the nearest colour to the chosen paper’s background. The crayon is available in all good art shops and online. These crayons can also be used where shrink back has occurred in order to help reduce the visibility of the joins.

We would highly recommend the use of one of our branded pastes as these have been specially formulated to provide the best adhesion when used in conjunction with our wallpapers. However, any starch based, light, ready mixed adhesive would be suitable for our papers.

Providing the paste is stored unopened, in its original container, in dry conditions and away from frost, it should last around 2-3 years. However, once opened, the shelf life can vary as this can depend on how clean the tools were when the product was last used. The dirtier the tools the shorter the life as there is a higher chance of contamination. Generally, you should be able to tell when paste has gone off as it will have an unpleasant odour.

A 5kg tub of ready mixed light paste with no added water covers approx. 31.2m2, however this will change depending upon porosity of wall and substrate and so is merely a rough guide. This would be sufficient for: 5 x 520mm wide 10m rolls 4 x 686mm wide 10m rolls 7 x 3m 1.4m wide panels

Thinning is not recommended when using our paste unless you’re sizing a porous wall.

We do not add any fungicides to our paste, although they do contain in-container preservatives for shelf life purposes.

‘Half Drop’ repeat is where every other horizontal repeat (from side to side) is dropped down one half of its length, i.e. the design repeats itself on the diagonal rather than the horizontal axis. ‘Straight Match’ is where the pattern repeats across the full width of the fabric and is positioned at the same place at each selvedge. ‘Random Match’ is where there is no pattern match.

Railroaded is the term used for fabric patterns/designs that are printed or woven across the width of the fabric, instead of vertically down the length of the fabric. Normally, fabrics are printed or woven so the design runs vertically through the length of the fabric. By railroading the pattern/design it is turned 90 degrees to enable the width (selvedge to selvedge) to be used as the drop. The benefit of railroading wide width fabrics is that any width of curtain can be made without the need for joining multiple widths. Noting that the maximum drop will be the width of the fabric less an allowance for the header and hem.

The Martindale Abrasion Test is the measure of the wear on the surface of a fabric or textile while rubbing it with another material. The results of this test contribute to the assessment of the “End Usage” suitability of a fabric. The Martindale abrasion test takes a sample of the fabric and rubs it against an abrasive material, undergoing several assessments. The test is stopped when the specified number of threads are broken, or sufficient pile is removed from a velvet. The end point results are shown in 000’s rubs. The higher the result the better the durability. The British classification standard BS2543:2004 for upholstery fabrics, specifies the criteria for end usage i.e., Occasional domestic upholstery through to Severe Contract upholstery as below:

Orders exceeding 20m of wide width fabric will be dispatched on 3m wide poles.

When we treat here in the UK for upholstery or drapery standards, the fabric should be maintained by dry cleaning. The FR treatment is guaranteed for four years, or 5 dry cleans, whichever is the sooner. For fixed upholstery, we would recommend a professional upholstery dry cleaner to visit in situ. Where this is not possible, we recommend the below: Vacuum regularly to prevent the build-up of dirt. (build-up of dirt can reduce the effectiveness of the stain resist). For spillages - wipe clean using a microfiber cloth or sponge with warm water taking care not to damage the fabric surface. For more stubborn stains use mild soap solution but ensure you rinse thoroughly leaving no soap residue.

Due to moisture that may be present within a bathroom, we would suggest that a machine washable fabric is selected for this use.